Skip to main content

Carrier-COMe-T6-C30

FrontBack

Carrier-COMe-T6-C30 is SECO's 3.5-inch carrier board for COM Express Type 6 modules. It is designed as a common hardware baseline for rapid bring-up, concept validation, and early application development, allowing teams to work on a flexible carrier architecture while selecting the most suitable compute module for their target use case.

The C30 is used across SECO's COMe ecosystem as the shared platform behind development and evaluation flows. It supports a modular setup in which the carrier board and the COM Express module remain separate building blocks, making it easier to reuse the same hardware foundation across different processor families and project stages.

Depending on the scenario, the C30 can be used as a standalone reference carrier during hardware validation, as part of a development workflow, or inside evaluation bundles that help developers start testing the platform more quickly.

Hardware Overview​

Carrier-COMe-T6-C30 provides the connectivity and expansion layer required to evaluate COM Express Type 6 modules in a practical development environment. At platform level, the board is positioned to support display, networking, storage, expansion, and peripheral integration during early development and validation.

Main hardware highlights include:

  • Display interfaces based on DP++ outputs for external video connection
  • USB connectivity for peripherals and service operations
  • Dual Gigabit Ethernet support for network validation
  • M.2 expansion options for wireless, storage, and additional integrations
  • Serial, GPIO, and service-oriented interfaces for embedded development
  • Power input designed for development kit and evaluation workflows
  • A modular architecture shared with SECO COMe-based kits and reference solutions

What are you using?​

If you are working with Carrier-COMe-T6-C30 as part of a complete kit, use the dedicated page that matches your current setup. This helps you access the correct assembly flow, accessories information, and first boot guidance.

  • If you are using an Eval Kit, go to the dedicated Eval Kit page:
EVAL-KIT-SOM-COMe
  • If you are using a Dev Kit, go to the dedicated Dev Kit page: DEV-KIT-COMe-3.1-T6
DEV-KIT-COMe-3.1-T6
  • If you are using a COM Express module, go to the Developer Center COMe module list:
COM Express module list

Technical Documents​

At the following Links you will find documentations like Manual and Rev. specific documents.

Manual​

[Manual] Carrier-COMe-T6-C30

Datasheet​

[Datasheet] Carrier-COMe-T6-C30

Product page​

Carrier-COMe-T6-C30

How can I configure jumpers?​

ComponentDescriptionUseDefault configuration (Fig.1)
JP14Set no jumper to enable M.2 on CN11
Set jumper 1-2 to disable M.2 on CN11Unplugged
JP15Unplugged
JP13Set no jumper to disable eDP-to-LVDS CONV
Set jumper 1-2 to enable eDP-to-LVDS CONVUnplugged
JP1Set no jumpers to enable M.2 on CN12
Set jumper 1-2 to disable M.2 on CN12Unplugged
JP2Unplugged
JP3COM1Set no jumper for RS-485
Set jumper 1-2 for RS-422
Set jumper 2-3 for RS-232Unplugged
JP4COM2Set no jumper for RS-485
Set jumper 1-2 for RS-422
Set jumper 2-3 for RS-232Unplugged
JP16PANEL BACKLIGHT VOLTAGESet jumper 1-2 for 12V
Set jumper 2-3 for 5V2-3 Plugged
JP17PANEL VDD VOLTAGESet jumper 1-2 for 5V
Set jumper 2-3 for 3.3V2-3 Plugged
JP10PANEL INTERFACESet no jumper for LVDS
Set jumper 1-2 for eDPUnplugged
JP12BIOS_DIS1Set JP11 and no JP12 for SPI on carrier
Otherwise for SPI on moduleUnplugged
JP11BIOS_DIS0Unplugged
JP9VDD_EN LevelSet no jumper for 3.3V
Set jumper 1-2 for 5VUnplugged
JP8BKLT_EN LevelSet no jumper for 3.3V
Set jumper 1-2 for 5VUnplugged
JP6BKLT_CTRL LevelSet no jumper for 3.3V
Set jumper 1-2 for 5VUnplugged
JP5GPIO/SDSet no jumper for GPIO
set jumper 1-2 for SD CARDPlugged

Fig. 1: Description of jumpers possible configuration

What to connect and where?​

Further information about placement and description of connectors are available here.