SOM-SMARC-MX8M-Plus (D18)
Depending on the configuration and following revisions, the board's features are subject to change. For detailed information on hardware specifications, please visit www.seco.com.
SOM-SMARC-MX8M-Plus is a SMARC Rel. 2.1.1 compliant module with NXP i.MX 8M Plus Applications Processors.
For ordering purposes, the SOM-SMARC-MX8M-Plus is referred to by its base code, "D18".
Technical Documents
At the following Links you will find documentations like Manual and Rev. specific documents.
Manual
Datasheet
Documentation
For a complete explanation of Clea OS and detailed installation instructions, refer to the official documentation:
Download Clea OS Images
To quickly get started, download the latest complete prebuild Clea OS images (or other binaries like U-Boot, Linux Kernel, SDKs) from the official release page:
Build Clea OS
The source code for Clea OS can be found at the following Gitlab organization. To build a complete BSP image from source you can check the Get Started pages of the documentation.
Downloads
| Release | Version / Link |
|---|---|
| Clea OS 2-02-00 | Clea OS scarthgap_2-02-00 |
| Clea OS 2-01-00 | Clea OS scarthgap_2-01-00 |
| Clea OS 2-00-00 | Clea OS scarthgap_2-01-00 |
| Clea OS 1-10-00 | Clea OS kirkstone_1-10-00 |
| Clea OS 1-09-00 | Clea OS kirkstone_1-09-00 |
| Clea OS 1-08-00 | Clea OS kirkstone_1-08-00 |
| Clea OS 1-07-00 | Clea OS kirkstone_1-07-00 |
| Clea OS 1-06-00 | Clea OS kirkstone_1-06-00 |
Legacy Software (not recommended)
This section contains releases (source code and binaries) for older BSPs and Yocto images.
Source code
Source code for linux kernel, u-boot and yocto seco layers is available here.
Binaries
Here you can find the latest binaries available and here a guideline for flash seco-image:
Board configuration| Version| image| filesystem| u-boot| kernel
| Board configuration | Version | image | filesystem | u-boot | kernel |
|---|---|---|---|---|---|
| All | 5.4.70 - 1.0.0 | seco-image-base seco-image-test | seco-image-base seco-image-test | u-boot | kernel |
EC Firmware
| Version | FW loader+main | FW main |
|---|---|---|
| 0x0F02 | CSD18EC_loader_main.bin | CSD18EC_main.bin |
| 0x0F03 | CSD18EC_loader_main.bin | CSD18EC_main.bin |
Field Update Tool: fwFlash
Known Issues
| Issue ID | Description | Impacted HW Revision | Impacted SW Version | Fix |
|---|---|---|---|---|
| D18-ISS-1 | Wi-Fi hangs with Scan command timeout (0x107) if the scan occurs at the same time as A2DP streaming and BLE scanning. | ALL | ALL | Workaround: don't perform Wi-Fi scan, BLE scan and A2DP streaming simultaneously. |