Carrier-COMe-T6-C30

Depending on the configuration and following revisions, the features of the board are subject to change. For detailed information on hardware specifications, please visit www.seco.com

Technical Documents

At the following Links you will find documentations like Manual and Rev. specific documents.

Manual

[Manual] Carrier-COMe-T6-C30

Datasheet

[Datasheet] Carrier-COMe-T6-C30

Product page

Carrier-COMe-T6-C30

How can I configure jumpers?

Component	Description	Use	Default configuration (Fig.1)
JP14		Set no jumper to enable M.2 on CN11
Set jumper 1-2 to disable M.2 on CN11	Unplugged
JP15		Unplugged
JP13		Set no jumper to disable eDP-to-LVDS CONV
Set jumper 1-2 to enable eDP-to-LVDS CONV	Unplugged
JP1		Set no jumpers to enable M.2 on CN12
Set jumper 1-2 to disable M.2 on CN12	Unplugged
JP2		Unplugged
JP3	COM1	Set no jumper for RS-485
Set jumper 1-2 for RS-422
Set jumper 2-3 for RS-232	Unplugged
JP4	COM2	Set no jumper for RS-485
Set jumper 1-2 for RS-422
Set jumper 2-3 for RS-232	Unplugged
JP16	PANEL BACKLIGHT VOLTAGE	Set jumper 1-2 for 12V
Set jumper 2-3 for 5V	2-3 Plugged
JP17	PANEL VDD VOLTAGE	Set jumper 1-2 for 5V
Set jumper 2-3 for 3.3V	2-3 Plugged
JP10	PANEL INTERFACE	Set no jumper for LVDS
Set jumper 1-2 for eDP	Unplugged
JP12	BIOS_DIS1	Set JP11 and no JP12 for SPI on carrier
Otherwise for SPI on module	Unplugged
JP11	BIOS_DIS0	Unplugged
JP9	VDD_EN Level	Set no jumper for 3.3V
Set jumper 1-2 for 5V	Unplugged
JP8	BKLT_EN Level	Set no jumper for 3.3V
Set jumper 1-2 for 5V	Unplugged
JP6	BKLT_CTRL Level	Set no jumper for 3.3V
Set jumper 1-2 for 5V	Unplugged
JP5	GPIO/SD	Set no jumper for GPIO
set jumper 1-2 for SD CARD	Plugged

Fig. 1: Description of jumpers possible configuration

---

What to connect and where?

Further information about placement and description of connectors are available here.